- Home
- Optics
- Spatial light Modulator
- PLUTO-2.1
PLUTO-2.1
- 描述
- Brand
描述
PLUTO-2.1 Spatial Light Modulator – Microdisplay Features | |
Display Type: | Reflective LCOS (Phase Only) |
Resolution: | 1920 x 1080 |
Pixel Pitch: | 8.0 µm |
Fill Factor: | 93 % |
Active Area | 15.36 x 8.64 mm (0.7″ Diagonal) |
Addressing | 8 Bit (256 Grey Levels) |
Signal Formats | HDMI – HDTV Resolution |
Input Frame Rate | 60 Hz |
The PLUTO-2.1 Spatial Light Modulator is the all-rounder within our product range. It is the best qualified and diversified SLM platform with many versions optimized for specific requirements, including high reflectivity versions featuring a dielectric mirror for high power applications. The PLUTO hardware is already implemented in different industrial applications.
The PLUTO-2.1 phase only Spatial Light Modulator (SLM) consists of a driver unit with standard digital video interface (HDMI) and a phase only LCOS (Liquid Crystal on Silicon) microdisplay with full HD resolution (1920 x 1080 pixel) and 8 µm pixel pitch leading to an active area diagonal of 0.7” with aspect ratio of 16:9.
The PLUTO-2.1 SLM is a plug & play phase modulator device and can be addressed with phase functions via standard graphics cards as an extended monitor device. The green color channel of the video signal is used for addressing 8 bit gray level patterns. Addressing can be done using the supplied Pattern Generator software or the SLM Slideshow Player software or standard image viewer software. HOLOEYE also provides an SLM Display Software Development Kit (SDK) which provides APIs (Application Programming Interface) for different programming languages.
HOLOEYE offers different display versions that can be driven with the PLUTO-2.1 driver unit. The different panel versions are optimized for the use at different wavelength ranges and different applications. All versions use fast full digital addressing which assures high reliability and a compact driver unit as basically only two voltages need to be generated.
The PLUTO-2.1 driver uses an HDMI interface for addressing phase functions and an USB connection to communicate with the driver (to changing the voltage vs. gray level distribution (gamma control) and dynamic range (voltage across the LC cell) in order to calibrate the SLM for different wavelengths). Besides this the driver features a trigger sync output to synchronize the device with external devices.
Version | Wavelength Range | Reflectivity | Max. Phase Shift | Comment | Recommendation |
PLUTO-2.1-UV-099 | 350 – 500 nm | 90 % (80% at 500 nm) |
5.2 Pi @ 355 nm 4.9 Pi @ 405 nm |
Dielectric Mirror | UV resistance, Higher Power Use |
PLUTO-2.1-VIS-014 | 420 – 650 nm | 65 % | 4.2 Pi @ 530 3.0 Pi @ 650 nm |
Fast Response Time | |
PLUTO-2.1-VIS-016 | 420 – 650 nm | 67 % | 6.9 Pi @ 530 nm 5.2 Pi @ 633 nm |
High Retardation Version |
Low Phase Flicker |
PLUTO-2.1-VIS-130 | 500 – 670 nm | 94 % (average) | 3.2 Pi @ 530 nm 2.5 Pi @ 633 nm |
Dielectric Mirror | Higher Power Use |
PLUTO-2.1-NIR-144 | 420 – 1100 nm | 80 % (average) | 10 Pi @ 520 nm 5.2 Pi @ 800 nm 3.6 Pi @ 1064 nm |
Broadband Use | |
PLUTO-2.1-NIR-015 | 650 – 1100 nm | 65-73 % | 5.4 Pi @ 800 nm 3.6 Pi @ 1064 nm |
High Retardation Version |
Low Phase Flicker |
PLUTO-2.1-NIR-113 | 730 – 940 nm | 95 % | 2.5 Pi @ 800 nm | Dielectric Mirror | Higher Power Use |
PLUTO-2.1-NIR-149 | 1000 – 1100 nm | 93 % | 2.9 Pi @ 1064 nm | Dielectric Mirror | Higher Power Use |
PLUTO-2.1-NIRO-023 | 1000 – 1400 nm | 74 % | 4.2 Pi @ 1300 nm | ||
PLUTO-2.1-TELCO-013 | 1400 – 1700 nm | 80 % | 3.9 Pi @ 1550 nm | ||
PLUTO-2.1-TELCO-142 | 1500 – 1600 nm | 93 % | 3.4 Pi @ 1550 nm | Dielectric Mirror |
PLUTO-2.1 Spatial Light Modulator Kit – Contents:
PLUTO-2.1 Spatial Light Modulator – Scope of Supply |
PLUTO-2.1 SLM Driver Box |
Phase Only Display incl. Flex Cable (1920 x 1080 Pixel) |
HDMI Cable |
USB Cable |
Power Supply (12V DC) |
Magnetic Display Mount |
Device Mount |
Safety instructions & quick-start guide |
USB flash drive with documentations, detailed manual, Configuration Manager and SLM software |
PLUTO-2.1 Phase Modulator – Software Features:
The PLUTO-2.1 phase only modulator devices can simply be addressed like an external monitor using the standard DVI / HDMI interface of the graphics card. No additional software or dedicated hardware is needed to operate the SLM.
The device is delivered with a Configuration Manager software. The Configuration Manager can be used to change geometrical settings, brightness, contrast and the electrooptical response by applying a new gamma curve or another digital drive scheme. For these advanced calibrations the device uses an USB connection to a virtual COM port of the computer.
In addition a HOLOEYE SLM Pattern Generator software is provided with the SLM:
- Computation of computer generated holograms (CGH) from user defined images
- generation of SLM signals representing basic optical functions such as lenses, gratings, axicon and vortex functions
- superposition of CGH’s with basic optical functions to combine functionalities
Besides that a special SLM Slideshow Player Software comes with the device. Also an SLM Display SDK is available for download which provides APIs (Application Programming Interface) for different programming languages to show images and data/ phase arrays directly on a HOLOEYE Spatial Light Modulator:
- C or C++ compiler (e. g. Microsoft Visual C++ Compiler)
- National Instruments LabVIEW 2011 and later
- MathWorks MATLAB R2009b and later
- Octave 7.2
- Python 2.7 and 3.x
Related products
LC 2012
$8,000.00
ERIS
$16,000.00
FSLM-HD70-A/P
$10,000.00
LUNA
$16,000.00
LETO-3
$16,000.00
FSLM-2K55-P
$10,000.00